Haltech Nexus R3 + universel Wire-in faisceau Kit - 2.5m (8')
Réf. HT-193200 — Gamme Nexus
Description
Nexus R3 combines the functionality of un module de distribution de puissance, un enregistreur de données, un contrôleur large bande et un state-of-the art système de gestion moteur in one powerful device we call un VCU (unité de contrôle véhicule)
4 x 25A (continuous) push-pull PWM capable (5 kHz) Sorties (for power to injecteurs / bobines, transbrake, ventilateur, pompe à carburant)
8 x peak/hold injector drivers (can be used as low side drive Sorties)
8 x low current ignition Sorties (can be used as low side drive Sorties)
6 x low side drive Sorties, PWM capable (DPOs)
6 x push-pull / h-bridge Sorties (8A, PWM capable), eg pour electronic throttle
11 x 0-5V analog Entrées avec redundancy pour electronic throttle et switchable 5V pullup
Trigger et home Entrées avec differential Entrées, adjustable thresholds et glitch filters
6 x synchronous pulsed Entrées, zero crossing or adjustable thresholds - cam sensor Entrées, frequency Entrées or 0-5V analog Entrées
1 x on-board contrôleur large bande, supporting NTK et LSU4.9
1 x on-board 4 bar MAP sensor
2 x CAN ports avec switchable termination
Onboard enregistrement de données - Up to 300 channels of logging at sample rates up to 1ms (1kHz) avec 128MB of internal memory
HARNESS Description
Ideal pour dedicated race cars, engine swaps et custom wiring jobs. The Universal Wire-in Harness has un set of VCU connectors at one end et unterminated wires at the other. All the wires at the unterminated end are colour coded et clearly labelled. Connect your Haltech VCU to the terminated end et follow your Schéma de câblage pour all the engine connections. Load your base map et you're ready to go!
Colour coded et labelled wires that match the detailed Schéma de câblage pour un confusion free construction process
The Schéma de câblage is accompanied by the full VCU manual et Software located on the USB key provided avec the VCU, or downloadable from the Haltech Website
Caractéristiques
- Controlled via NSP (Nexus Software Programmer)
- apprentissage long terme
- contrôle moteur pas à pas
- 4D contrôle de pression de suralimentation en boucle fermée
- Closed Loop CO2 Control
- Rotational Idle
- launch control
- contrôle de traction
- anti-lag
- Dual contrôle cliquetis
- contrôle transbrake
- chronomètre course
- Multi Stage Fuel Injection
- Multi-level Engine Protection
- 6 Stage Nitrous Control
- 4-sensor variable cam control
- Intake Air Bleed Control
- Flat Shift Control
- Shock Travel & Ride Height Control
- Advanced Torque Management
- On-board Wi-Fi
- On-board datalogging (128MB)
- AUTOMATIC TRANSMISSION CONTROL
- Ford AODE/4R70W
- GM 4L60E
- GM 4L80E
- Toyota A340E
- Lenco
- Liberty
Spécifications
- Référence: HT-193200
- Catégorie: Nexus R3
- Poids indicatif: 4740 g
- UPC: 9356450013741
- Prix HT catalogue: 2273.33 EUR
Contenu
- Nexus R3 VCU, SurLok connectors (Red et Black), antenne Wi-Fi, vis de montage, câble USB-C, USB-C dust cap. Nexus […]